Clearwater Shallow Dig Silage/Slurry Cesspool 4,800 ltr

This is a Clearwater 4,800 litre shallow dig silage cesspool manufactured by Kingspan Environmental and made of Glass Reinforced Plastic (GRP).

Cesspools are suitable for locations without mains drainage where the discharge of effluent is not possible due to unsuitable ground conditions or limited space to construct a soakaway.

Designed and manufactured in accordance with BS 4994/BS EN976. They are available in four specifications depending on the method of installation, tank invert depth and ground water table; standard, heavy, extra heavy and special. Manufactured from GRP (orthophalic Polyester resin and glass reinforcement) Silage effluent storage tanks are supplied with a Chemical resistant liner (CR).

Features and benefits

• Pea gravel backfill for dry sites
• EN 12566-1 approved
• Installation in hard rock areas where deep digs
are not possible
• 30mm between inlet and outlet
• 0.5 and 1m neck extensions available for
deeper installation

Why shallow dig?

The shallow dig design can save you money on site as you wont need to excavate as much as you would with a traditional spherical tank, meaning it’s usually quicker to install and reduces the chance of groundwater issues.

Capacity (litres): 4,800 ltr

Diameter: 1920mm

Inlet Invert: 500mm

Length (mm): 3965mm

We can also offer an installation service for our stormwater attenuation, rainwater harvesting, water storage and sewage treatment solutions. Get in touch here.

Our team of experts are available and ready to speak to you. You can contact us or call us directly on 0121 351 3230. Available Mon-Friday 8am-5pm.